Suspension and driveline parts carry the load — and around Laredo, the load is heavy and the roads aren’t always kind.
Caliche yards, rail crossings, rough industrial streets, and the ranch and oilfield roads off US-83 and SH-359 punish air springs, leaf springs, shocks, and torque rods. Drayage and yard tractors that pull heavy containers and trailers dozens of times a week wear out U-joints, center bearings, and fifth wheels. A small vibration today is a broken driveshaft tomorrow.
We handle chassis and driveline repairs at your yard, truck stop, or roadside location, and we’ll be straight with you about anything that needs a lift.
What our Suspension & Driveline Repair covers
- Air spring (air bag) replacement on tractors and trailers
- Ride height checks and leveling valve adjustment or replacement
- Shock absorber replacement
- Leaf spring and U-bolt inspection, and spring replacement where access allows
- Torque rod and bushing replacement
- Air suspension line and fitting leaks
- Universal joint (U-joint) replacement
- Driveshaft center (carrier) bearing replacement
- Wheel seal leaks on drive and trailer axles
- Hub oil level checks and wheel bearing inspection
- Fifth wheel lubrication, adjustment, and locking jaw inspection
- Pinion and differential seal leak diagnosis
What can't be done on the roadside
- Transmission removal and clutch replacement
- Differential rebuilds and rear-end replacement
- Frame straightening or cracked frame rail repair
- Complete axle replacement or alignment
- Wheel bearing jobs where the hub or spindle is damaged
Fix it on site or tow it?
A blown air bag, a leaking leveling valve, a failed U-joint, or a leaking wheel seal can usually be fixed on site. With a broken leaf spring or a failed air spring, the truck may need to stay put until it’s repaired — especially if it’s loaded.
A tow is safer when a driveshaft has come apart and damaged other parts, when a wheel bearing has failed and damaged the hub or spindle, or when a broken spring or torque rod has shifted the axle out of position. Don’t drive a truck with a driveshaft that’s banging or a wheel end that’s smoking.
What to tell dispatch when you call
The more dispatch knows up front, the better the odds the mechanic shows up with the right parts and tools on the first trip.
- Where the problem is — steer axle, drive axles, or trailer — and which side
- Whether the truck or trailer is leaning or sitting low
- Any vibration, clunking, or grinding, and at what speed it happens
- Oil or grease on the inside of a wheel or tire
- Loaded or empty
Truck makes & engines we work on
- Freightliner
- Peterbilt
- Kenworth
- Volvo
- Mack
- International
- Western Star
Class 6 through Class 8 trucks, including engines from Cummins, Detroit Diesel, PACCAR, Volvo, Mack, Navistar, and Caterpillar.
Suspension & Driveline Repair around Laredo & South Texas
Suspension and driveline repairs come up often in the yards along Mines Road and Killam Industrial Boulevard, where yard tractors and drayage trucks see heavy, constant use, and on the ranch and oilfield roads off US-83, US-59, and SH-359, where rough surfaces break springs and shocks.
Highways
Towns
Suspension & Driveline Repair FAQ
Can I drive with a blown air bag?
It’s not recommended, especially loaded. A failed air spring changes ride height and load distribution, can damage other components, and can put the truck out of service.
What causes a driveline vibration?
Worn U-joints, a failed center bearing, a bent or out-of-balance driveshaft, or incorrect driveline angles. A vibration that changes with road speed often points to the driveline.
How do I know if a wheel seal is leaking?
Look for oil or grease on the inside of the wheel and tire, or a low oil level in the hub cap sight glass. A leaking seal can lead to a wheel bearing failure.
Why is my trailer leaning?
Usually a failed air spring, a leak in the suspension air line, or a bad leveling valve. On spring-ride trailers, a broken leaf spring can do it.
Is a broken leaf spring an out-of-service violation?
It can be, depending on how many leaves are broken and which ones. See our DOT out-of-service guide.
Do you work on fifth wheels?
Yes. Lubrication, adjustment, and inspection of the locking jaws and release handle are routine. A worn or damaged fifth wheel that needs replacement may need a shop, depending on parts.